Recently, this Audi RS7 came into Prestige Protective Film in Waterford, MI for a full matte vinyl wrap and window tint upgrade. The goal was clear, give the car a bold, aggressive finish while protecting the original paint and enhancing everyday driving comfort.
This Audi RS7 came in for a full visual transformation. The owner wanted a darker, more aggressive look that matched the car’s performance styling without going with permanent paintwork. A full matte vinyl wrap was the right solution to give the vehicle a bold new finish while also helping preserve the original paint underneath.
To complete the look, we added window tint for better privacy, reduced glare, and a cleaner side profile. Together, the wrap and tint gave this RS7 a sharper presence on the road and a more unified appearance from every angle.
This Audi RS7 received a full exterior styling upgrade built around appearance, protection, and daily driving comfort. Our team focused on giving the car a completely different look while keeping the finish clean, uniform, and professionally installed from panel to panel.
These services gave the Audi RS7 a full visual transformation with a cleaner profile, darker finish, and more commanding presence on the road.
We started with a full vehicle inspection to evaluate the condition of the paint, trim, glass, and body panels. This step helps us identify anything that could affect vinyl adhesion or final appearance, including contamination, wax residue, edge buildup, or damaged trim pieces. We also reviewed the owner’s goals for the project. The focus was clear. Create a darker, stealthier look that matched the RS7’s aggressive styling while improving cabin privacy and comfort with window tint.
During this phase, we mapped out key wrap zones, discussed panel transitions, and identified the best approach for tight areas like the mirrors, door handles, window surrounds, front bumper contours, and rear quarter lines. The Audi RS7 has long, flowing body lines and complex curves, so planning the install correctly is a major part of getting a smooth, consistent matte finish.
Before any vinyl wrap or window tint installation begins, the vehicle has to be fully cleaned and stripped of anything that can interfere with bonding. We performed a full exterior wash to remove dirt, road film, and surface grime. From there, we moved into decontamination using paint-safe cleaners and detail tools to remove embedded contaminants from the panels.
Next, we completed an alcohol-based panel wipe to break down oils, polish residue, and invisible buildup that can lead to lifting or trapped debris under the wrap film. We paid close attention to seams, edges, body panel gaps, door jamb edges, and recessed areas where contamination tends to collect. Matte wrap installation depends heavily on clean surfaces because any trapped dust, oil, or moisture can affect both appearance and durability.
At the same time, the glass was prepped for window tint. We cleaned the inside of each window thoroughly using tint-safe glass cleaner, microfiber towels, and detail tools to clear out dust from the channels, seals, and corners.
To produce a cleaner, more refined wrap, we created access to the areas where film needs to tuck, align, and finish properly. On a car like the Audi RS7, that often means working around trim pieces, badges, lighting edges, mirror housings, and tight body transitions. The goal is not just to lay vinyl on the surface. The goal is to create a color change wrap that looks intentional, uniform, and professionally finished from every angle.
By opening up critical install areas, we can reduce visible seams, improve edge wrap quality, and help the matte vinyl sit more naturally along the body lines. This is especially important on the front bumper, around the grille area, along the doors, and across the rear quarter sections where the RS7’s shape is more sculpted.
Once the vehicle was fully prepped, we moved into vinyl wrap staging. For a full matte wrap, every section has to be planned carefully so the film flows correctly across the car and maintains a consistent finish. We measured, cut, and prepared the wrap panels based on the RS7’s dimensions and panel shapes. Larger sections like the hood, roof, doors, and rear quarters require careful handling to avoid stretch distortion and maintain an even matte texture.
Our installers positioned each section of wrap film with close attention to body lines, relief points, and tension areas. Matte vinyl shows imperfections differently than gloss film, so proper positioning matters even more. Clean film layout helps reduce stress in the material and creates a smoother, more natural appearance once the wrap is fully set.
After the exterior wrap was completed, we moved to the window tint portion of the project. We cut the tint film to fit the Audi RS7’s side and rear glass with precision, making sure the shape matched the window layout cleanly. The rear glass on performance sedans often requires careful heat shrinking and shaping, so we used controlled heat and film-forming techniques to prepare it before installation.
Inside the vehicle, we applied the tint using slip solution, squeegee tools, and edge finishing methods designed to leave a smooth, bubble-free result. We aligned the film cleanly with the factory glass lines and tucked edges neatly for a refined appearance. Window tint on this build was not just about privacy. It also added visual balance to the matte wrap and helped complete the darker, performance-inspired look.
Once the wrap and tint were installed, we completed a full quality control inspection under bright lighting. We checked every major panel, seam, corner, and edge for consistency, adhesion, alignment, and finish quality. Matte wraps require close visual inspection because texture consistency and line flow are a major part of the final look. We also checked the tint for clarity, edge finish, and moisture release.
After inspection, we completed final wipe-downs, cleaned the glass, and prepped the Audi RS7 for delivery. The finished vehicle left with a uniform matte appearance, sharp contrast, darker glass, and a far more aggressive road presence. This process is what allows Prestige Protective Film to deliver clean, high-level wrap and tint work that looks right and performs the way it should over time.
Once the work was complete, this Audi RS7 looked dramatically different from when it arrived. The full matte vinyl wrap gave the car a stealthier, more aggressive finish that completely changed its presence on the road. The new look matched the RS7’s sharp body lines, wide stance, and performance styling, giving it a cleaner and more commanding appearance from every angle.
The window tint helped complete the transformation by adding darker, more refined glass that worked perfectly with the matte exterior. It improved privacy, reduced glare, and made the overall profile look more unified. Together, the wrap and tint created a custom finish that felt intentional, balanced, and built around the character of the car.
This RS7 left our Waterford shop with a stronger visual identity, a more premium feel, and a finish that turns heads the moment it hits the road.
“Not only was Ali great to work with but he’s FAST and efficient!”
Review Link : https://share.google/DhJjKfZqsK45XdwUN
Even a short review like this says a lot. It reflects the kind of experience we work to deliver at Prestige Protective Film every day. Clear communication, fast turnaround, and clean, high-quality work matter just as much as the final look. For this Audi RS7 owner, the process felt smooth and the result spoke for itself.
Give your vehicle a sharper look with professional vinyl wrap and window tint installed by Prestige Protective Film. From full matte wraps to custom styling upgrades, we help drivers in Waterford, MI create a finish that looks clean, bold, and built to stand out. Reach out today to get a quote for your next wrap project.
